LTE Filter

<em>LTE</em> Filter
 
 


Free

Check out the Amplify, which has a built in LTE Filter plus amplifies your signal

Price: $19.00


Description Technical Specifications FAQ's & Support Docs
 

The Channel Master LTE Filter improves over the air (antenna) signals by filtering out mobile LTE signal interference.

The Channel Master LTE Filter is designed to clear your OTA TV signal path from the common interference created by mobile LTE signals. The proliferation of LTE signal towers and connected LTE devices are a common cause of intermittent television signal disruption because mobile carriers operate on frequencies that can be very close to your broadcast TV frequencies. These disruptions can result in weak signals, pixilation or even channel loss, and can be especially disruptive when using an amplifier with your TV antenna.

Channel Master highly recommends using an LTE Filter with TV antenna installations in metro and suburban areas in order to assure optimum performance. If you require an amplifier for your TV antenna installation, we recommend the Channel Master Amplify, a high-end amplifier that includes an internal LTE filter. If you are already using an amplifier with your TV antenna, the LTE Filter will work with your existing installation.

What’s Included

LTE Filter

Features

Blocks Interference from 3G, 4G and 5G Smartphones and Transmitters
Minimal Setup is Required
Professional Grade Construction and Quality

90 days Limited Warranty Limited Warranty

parts and labor 90 days of parts and labor
support 90 days of support through phone, online chat and/or e-mail
How the LTE Filter Improves TV Antenna Reception
Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 150 Write a review.

Accessories
Stream+ Media Player and OTA DVR
Sale Price: $129.00
Streaming Media Player and OTA DVR for TV Antenna
50' Coaxial Cable Black
Price: $15.00
50' Coaxial Cable Black
FLATenna 35
Price: $10.00
<em>FLAT</em>enna 35
STEALTHtenna Bundle
Sale Price: $129.00
CM-3010HDBDL
SMARTenna+ Indoor TV Antenna
Sale Price: $49.00
Amplified Indoor TV Antenna with Active Steering Technology
STEALTHtenna 50
Price: $29.00
STEALTHtenna CM 3010HD Outdoor TV Antenna


  0 of 0 people found the following review helpful:
 
5 of 5 LTE Filter for tv antenna December 12, 2019
Reviewer: Dave in Vancouver from Vancouver , Washington  
This was purchased to use on a scanner . I live 1 mile from
a 800 mhz local police /fire repeater. My scanner was being overloaded by that site. Since I installed it , my scanner doesn't get overloaded and I use a splitter backwards to receive that intelli-repeater site with only a one inch wire on one input and my rooftop antenna for the VHF and UHF using the LTE filter on that input. I also receive repeaters from 50 miles away that I wasn't before installing the LTE filter. This filter is great!!


  0 of 0 people found the following review helpful:
 
5 of 5 Cm LTE filter December 12, 2019
Reviewer: Craftmantc77 from Michigan  
Watched video and connected like it said. Works very well. Thanks CM


  0 of 0 people found the following review helpful:
 
4 of 5 Works as it was designed to October 15, 2019
Reviewer: FREDDY from Effort Pennsylvania  
I have an alarm system that runs over 4G LTE signal and have a cellular base nearby where antenna is.  From time to time, I get robotic cellular breakages on my TV very much different from pixilation.  I did not know what this was at first and assumed I needed an amp or pre amp.  With a little research, there was this LTE filter which explained my issue.  After using this product for 1 week, I do not get the cellular interference anymore.  I have 4 TV's and I placed this after the ground block which then comes to my 4 way splitter.  I simply put this on the input of the splitter and my interference issue has been nullified.  

I gave it a 4 star rating because it doesn't suggest how much torque to tight it needs.  Also, by the design, if you put to much torque, it looks like it can break by spinning off the sheilding.  This isn't a bad product, but a little torgue requirement or suggestions would be nice.  I've applied 20lbs to tight with my torque wrench.


  0 of 0 people found the following review helpful:
 
5 of 5 Worked for me October 15, 2019
Reviewer: Jerry from Union Star ky  
All I can say is it's working. Just one suggestion, include boot for those of us that has outside boosters.


  0 of 0 people found the following review helpful:
 
3 of 5 LTE filter September 7, 2019
Reviewer: Anonymous Person from Battle Creek, MI  
It seemed to help some, but I still get pixels.


View All Customer Reviews