Skip to product information
1 of 6

Amplify+ Adjustable Gain Preamplifier for Professionals

Amplify+ Adjustable Gain Preamplifier for Professionals

16 - 26dB Adjustable Gain TV antenna signal amplifier with separate UHF and VHF inputs

About This Item

CM-7778HD
  • Signal Amplification: Designed to amplify TV antenna signals, ensuring enhanced reception and improved picture quality.
  • Adjustable Amplification: Offers adjustable gain settings to tailor the amplification for specific installation scenarios, preventing issues caused by excessive or insufficient gain.
  • Separate UHF and VHF Inputs: Facilitates band-specific installations for optimized signal reception.
  • Outdoor Heavy-Duty Housing: Constructed with a die-cast metal housing and weatherproof ports, built to withstand extreme weather conditions.
  • LTE Filtering: Incorporates 3G/4G/5G LTE signal filtering to mitigate interference from LTE signal towers and connected devices, ensuring stable reception.
  • Switchable FM Trap: Blocks unwanted FM radio signals that can interfere with UHF and VHF television signals, with an internal switch to toggle FM signal pass-through.
  • Power Passing Splitter Required: When installing with a splitter, a power passing splitter is necessary as most common splitters do not pass power.
Regular price $99.00
Regular price Sale price $99.00
Sale Sold out

Item out of stock.

Equivalent Alternative Available: TV Antenna PreAmp 1 (CM-7779HD)

View full details

Product Information

Overview

Amplify+ is intended for outdoor professional use, including multi-dwelling units and commercial applications. The product provides separate UHF and VHF inputs for two-antenna, band-specific installations, as well as a switchable FM trap.  (When installing a splitter with this amplifier it must be a power passing splitter, most common splitters will not pass power.)

Amplify+ is an outdoor preamplifier designed for mast-mounting with the TV antenna(s). Professional installers may choose options for High gain, Low gain, FM signal blocking and band-specific dual antenna use if required.

Unlike the consumer-ready Amplify product, Amplify+ does not include a USB powering option for indoor use.

Outdoor Heavy-Duty Housing

Amplify+ is constructed of a die-cast metal housing with weatherproof ports to support outdoor installations in extreme weather conditions.

Adjustable Amplification

Amplify+ provides adjustable settings that allow the installer to select the appropriate gain required for a specific installation scenario, eliminating the potential issues encountered from either too much or too little gain. The internal switch can be placed at either a High or Low setting.

Adjustable FM Trap

Amplify+ provides a trap mechanism to block unwanted FM Radio signals from FM-enabled commercial TV antennas, which can cause interference with UHF and VHF television signals. Pass-through of FM signals can be enabled or disabled via an internal switch.

LTE Filtering

Like the consumer-ready Amplify product, Amplify+ provides 3G/4G/5G LTE signal filtering. The proliferation of LTE signal towers and connected LTE devices are a growing cause of intermittent disruption of over-the-air broadcast television signals. These disruptions can result in weak signals, pixelation or even channel loss, and can be especially disruptive when an amplifier is used with a TV antenna.

Specifications

What's Included
AMPLIFY+ TV Antenna Amplifier, Power Inserter, Power Adapter, Mounting U-Bolt, (2) Mounting Screws, Installation Guide
Warranty
1-Year Limited Warranty
Impedance (Input and Output)
75 Ohm
Connector
F-type
Frequency range
54MHz~88MHz, 174MHz~260MHz, and 470MHz~609MHz
Gain VHF
+23dB (High) / +16dB (Low)
Gain UHF
+26dB (High) / +20dB (Low)
Gain Combined
+23dB (High) / +16dB (Low)
Noise Figure
1.5 dB
UL Listed
Yes
RoHS Compliant
Yes
Return Loss
<-15dB
Input Voltage
12-15 VDC
FM Trap
95-108 MHz; >13dB Down
Operating Temperature
-40 C to +60 C
Size (Product)
5.375" x 3.5" x 3.0"
Size (Packaging)
8.125" x 5.125" x 3.0"
Weight (Product)
13 oz
Weight (Packaging)
2 lb
 

Customer Reviews

Based on 59 reviews
97%
(57)
2%
(1)
2%
(1)
0%
(0)
0%
(0)
N
New England Antenna Service since 1949
Installers Choice

Been a Antenna dealer for over 45 years and Channel Master equipment has always been the very best in the industry.

F
F.D.
The best product

Best shipping and quality products for me.

K
KB Ranch
it helped

We are about 65 miles from the transmitters. We were experiencing signal loss quite a bit. I had purchased and installed the CM7777777777 or something or other, some years back. Not really sure why it stopped working, but it did. I installed the new one and it even picked up about 10 more channels on the scan. We now get 91 channels of which we watch maybe 10 different channels. I cut off cable about 12 years ago due to their price going up and up. DirecTV and the others get you started with a low monthly cost for 12 months and then the cost just keeps going up from there. Now with the new splitter installed we get the same channels in all the rooms. Thank you Channel Master for the help. I also use TIVO and it used to be great but now it seems to be nothing but a pain in the butt. Picture with no sound or sound with no picture nearly everyday. Have to reboot over and over! what's up with that?

J
Jeff
Improved my signal

Bought the CM-7778HD to replace a CM-7779HD because I needed to add a VHF antenna to my current antenna. Combined the antenna's and set the amplifier's gain to high setting and I am happy with the results. I have noticed an improvement in the VHF signal and the UHF works as before. To me Channel Master and Televes make the best antenna products.

M
Mark Anderson
More than what I expected.

I have a ClearStream MAX-V HDTV Antenna in my attic. ~50 miles away from the broadcast towers in Washington DC and over the Bull Run Mountains. I get about 80 channels (some of which I probably won't watch) but it works fantastic. The ClearStream has only two short VHF elements, but I can still get the VHF channels clearly. I might add my old school VHF antenna and split the UHF and VHF signals and see if that makes any difference.
My only issue is that the bracket to hold the amplifier on the ClearStream post isn't large enough for the ClearStream post. Maybe some wire ties will work.
Thanks Channel Master.Great job and I can recommend this product to anybody.