Unité de commande du rotateur d'antenne

 
$85.00

Item temporarily out of stock.

Email me when back in stock


Aperçu

Unité de commande de rotateur d'antenne compatible avec les unités d'entraînement de rotateur d'antenne de marque Channel Master.

L'unité de commande Channel Master Rotator est conçue pour fonctionner avec toutes les unités d'entraînement du rotateur extérieur Channel Master (unité d'entraînement non incluse). Lorsque le boîtier de commande est connecté à une unité d'entraînement extérieure, il permet la rotation d'une antenne extérieure depuis un emplacement intérieur avec une télécommande portative. L'unité de contrôle Channel Master dispose d'une mémoire interne qui permettra à l'utilisateur de régler automatiquement une antenne pour la faire pivoter jusqu'à 69 positions préprogrammées. L'unité de commande de rotateur autonome est parfaite pour ceux qui ont besoin d'une unité de commande de remplacement pour une installation d'unité d'entraînement existante ou qui cherchent simplement à passer à une unité de commande de style plus récent.

Ce qui est inclu

Unité de commande du rotateur d'antenne
Télécommande
Câble d'alimentation
Garantie limitée d'un an

Caractéristiques

Conception physique mise à jour (nouvelle)
Nouveaux boutons encastrés sur le panneau avant (nouveau)
Fiabilité de position améliorée (nouveau)
Nouvel écran LED bleu (nouveau)
Alimentation intégrée (nouveau)
La synchronisation automatique garantit une précision de position extrême
Contrôle d'accès directionnel via le numéro de chaîne TV ou l'emplacement d'une boussole numérique
L'unité de commande discrète se marie avec n'importe quel décor
Télécommande infrarouge

Spécifications techniques

Une mémoire non volatile Maintient les emplacements pendant les pannes de courant
Pouvoir 120 V CA 60 Hz uniquement
Taille (produit) 3,25 x 5,375 x 1,5 pouces
Taille (emballage) 3x7,5x7 pouces
Poids (produit) 1,6 livre
Poids (emballage) 2,3 livres
 
 

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
a
anonymous
Excellent Replacement for Old Style Controlle

I acquired this controller to replace an old style controller that has a knob to set direction. Unlike the old controller, the new one is quiet, accurate, and doesn’t weigh as much as a small car. The new controller has a feature that can automatically recalibrate the rotator after several rotations. The degree readout on the front panel is invaluable to me. The remote control is really convenient. I use this controller with an old 3-wire rotator sold by Radio Shack many years ago, and it should work with any 3-wire rotator branded by Channel Master, Radio Shack, and others. I use it to position a 1-meter loop receiving antenna with excellent results. Well done, Channel Master!

a
anonymous
Antenna Rotator Control Unit

The device arrived quickly and was installed and works great

a
anonymous
Fix

Just what I needed. The previous unit stopped working so I was unable to rotate the antenna for best reception and could only bring in one scratchy station. After connecting to the new unit I received 16 channels. A world of difference in a rural community!

a
anonymous
replacement for old antenna rotator control u

This new one replaced one from 2000. The box is much larger and has blue numbers which are a little hard to see, it does not have a power supply but a direct plug in which eliminated some of the congestion on the power strip, also the remote is smaller than the old one. No other option other than to get it from Channel Master but they gave me 10% off for being a prior customer. I appreciated that.

a
anonymous
Nice upgrade from worn out rotator control un

Bought this to replace an old worn out Radio Shack Archerotor 15-1225B Antenna Rotator Unit that had the movement of the dial partially stripped. Set up was fairly straightforward for me as the existing 3 wires that were being used with the previous rotator unit were plug and play with this unit. Product works exactly as described! Just make sure that your TV antenna is pointed to magnetic north before synchronizing the control unit. If you don't, the control unit will still work, but the compass heading of the TV antenna compared to the displayed compass heading on the control unit will be different/offset.