Préamplificateur à gain moyen Titan 2 (Version 3)

 
$79.00

Aperçu

Le préamplificateur Titan 2 à gain moyen amplifiera les signaux reçus par votre antenne. Cet amplificateur d'antenne est un préamplificateur à gain moyen et à faible bruit utilisé pour permettre aux signaux les plus faibles de l'antenne d'être amplifiés à une force visible, et est idéal pour les installations dans lesquelles les tours de diffusion sont situées à des distances très variables. Le préamplificateur Titan 2 à gain moyen est une unité en deux parties, une unité d'amplification extérieure qui est montée sur le mât de votre système d'antenne et une unité intérieure qui alimente l'unité d'amplification extérieure. L'unité intérieure est stationnée à l'intérieur et se connecte à l'unité extérieure via un câble coaxial. (Lors de l'installation d'un répartiteur avec cet amplificateur, il doit s'agir d'un répartiteur de transmission de puissance , les répartiteurs les plus courants ne transmettront pas de puissance.)

Remarque : remplacement du produit pour un article indisponible

Nous avons le regret de vous informer que ce produit est actuellement indisponible. Cependant, nous avons une excellente alternative (modèle de nouvelle génération) qui, selon nous, répondra ou dépassera vos attentes : le PreAmp1 .


Préamplificateur de signal d'antenne TV à gain moyen.


Ce qui est inclu

Préamplificateur à gain moyen Titan 2
Inséreur de puissance
Adaptateur secteur
Câble coaxial
Boulon en U
Mode d'emploi
Garantie limitée d'un an


Caractéristiques

Améliore la qualité du signal
Diminue la pixellisation
Peut augmenter le nombre de chaînes
Bloque les interférences LTE des smartphones et émetteurs 3G/4G/5G.
Prend en charge ATSC 3.0, NextGen TV et 4K Broadcast lorsqu'ils sont disponibles
Le boîtier offre un blindage RF pour réduire les interférences
Très faible bruit
Gain : +16dB
Passage du signal FM sélectionnable
Indice de robustesse pour une utilisation en extérieur
Monté sur mât pour une proximité étroite avec l'antenne


Spécifications techniques

Tension d'entrée de l'alimentation 110-240 V, CA ~ 50/60 Hz, 200 mA (max.)
Tension de sortie de l'alimentation +13,2 V CC, 500 mA, 6,6 W (maximum)
Impédance (entrée et sortie) 75 ohms
Connecteur Type F
Gamme de fréquences 54 - 700 MHz
Gagner 16 dB
Chiffre de bruit Généralement inférieur à 2 dB
Homologué UL Oui
Conforme RoHS Oui
Perte de retour d'entrée <-15
Perte de retour de sortie <-15
Niveau d'entrée maximum 34 dBmV
Niveau de sortie maximum 50 dBmV
Piège FM 88-108 MHz ; >15dB vers le bas
Consommation d'énergie <5W
Température de fonctionnement -40°C à 60°C
Taille (produit) 5,375 x 3,5 x 3,0 pouces
Taille (emballage) 6,5x5,75x3,5 pouces
Poids (Produit) 12 onces
Poids (emballage) 2 livres
Diamètre du boulon en U (inclus) 1,875 po
 
 

Customer Reviews

Based on 119 reviews
75%
(89)
15%
(18)
5%
(6)
1%
(1)
4%
(5)
D
Dean
Awsome

It does work great I live 90 miles away from locals and amplifies my signal 40% to have a clean clear picture to watch without pixeling and going off .Easy install. Just wished they would keep it in stock and not discontinue it it works Great thanks channel Master.

J
Jim
78 Miles and watching Atsc 3.0 broadcast

Field review from vero beach fl - 32960 Watching stations in Orlando Fl - I am according to the Gov antenna website locator 78 miles from ABC CBS NBC FOX Broadcast stations - I purchased a Channelmaster extreme 80 antenna - 25 ft antenna pole(5 5ft sections) - Channel master midrange preamp - cell tower filter - Silicondust HD homerun tuner - I attempted to setup WPB antennas(71 miles away) but was choppy reception - I tuned in the orlando stations with excellent results I am getting green across the board with the HD GUI tuner meter - I do have a slight problem during the daytime with the current heat wave I can get intermittant signal interference - as soon as it rains a little to reduce the temperature the picture is clear again. I am not sure why the signal interruption occurs only when the heat index goes over 105 it seems - For my puposes, I wanted to stop paying for unnecessary cable charges on stations I never watch and only need the TV for golf and football. My wife can now access broadcast for shows she likes - So far this has been a successful cord cut - I am saving 80$ per month for cable tv and still have access to about 70 channels - In addition to the broadcast channels I am getting several independents, public channels - Most of the towers are broadcasting 3 or more channels per station - all in all I think this is going to work out fine!

R
Ray Woods
Preamplifier

This preamplifier help solve my reception issue. Thank you for this recommendation. Ray

T
Troy Van Leer
Titan 2 Medium Gain Preamp

Installed next to antenna on roof. It improved my channel signals on the stronger channels from 65% to 95% and weaker channels from 45% to 65%. Product did exactly what I was hoping for and channels don’t break up anymore.

G
Gary W Bower
Titan 2 Medium Gain Preamplifier

Two years ago I put up a Digital Advantage 100 antenna and a Titan 2 Medium Gain Preamplifier with an RCA rotor. High winds stripped the gears on the rotor. I had a 30 years antenna installer professional come over to fix my mess. He removed the rotor, got me back in business. He told me I had the best antenna and preamplifier. He also told me I should have a spare preamplifier on hand just in case something happens to the one I have installed on top of my tower. That is why I purchased the second Titan 2 Medium Gain Preamplifier. Your products work great.