Antenna Rotator Control Unit

CM 9521HDXCU TV Antenna Rotator Control Unit

Price: $85.00

Description Technical Specifications FAQ's & Support Docs

Antenna Rotator Control Unit compatible with Channel Master brand antenna rotator drive units.

The Channel Master Rotator control unit is designed to work with all Channel Master outdoor rotator drive units (drive unit not included). When the control box is connected to an outdoor drive unit it enables the rotation of an outdoor antenna from an indoor location with a hand-held remote control. The Channel Master control unit has internal memory which will allow the user to auto tune an antenna to rotate to up to 69 pre-programmed positions. The stand alone rotator control unit is perfect for those in need of a replacement control unit for an existing drive unit installation or simply looking to upgrade to the newer style control unit.

What’s Included

Antenna Rotator Control Unit
Power Cable
1-Year Limited Warranty


Updated Physical Design (New)
New Flush-Mount Front Panel Buttons (New)
Enhanced Position Reliability (New)
New Blue LED Display (New)
Integrated Power Supply (New)
Automatic synchronization ensures pinpoint position accuracy
Directional access control via TV channel number or digital compass location
Unobtrusive control unit blends with any décor
Infra-red remote control
Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 7 Write a review.

Rotator System
Price: $199.00
Rotator <em>System</em>

  0 of 0 people found the following review helpful:
5 of 5 Excellent Replacement for Old Style Controller December 28, 2019
Reviewer: Anonymous Person from Louisiana  
I acquired this controller to replace an old style controller that has a knob to set direction. Unlike the old controller, the new one is quiet, accurate, and doesn’t weigh as much as a small car. The new controller has a feature that can automatically recalibrate the rotator after several rotations. The degree readout on the front panel is invaluable to me. The remote control is really convenient. I use this controller with an old 3-wire rotator sold by Radio Shack many years ago, and it should work with any 3-wire rotator branded by Channel Master, Radio Shack, and others. I use it to position a 1-meter loop receiving antenna with excellent results. Well done, Channel Master!

  0 of 0 people found the following review helpful:
5 of 5 Antenna Rotator Control Unit July 22, 2019
Reviewer: Anonymous Person from Ohio  
The device arrived quickly and was installed and works great

  0 of 0 people found the following review helpful:
5 of 5 Fix July 16, 2019
Reviewer: Judy from Northern Minnesota  
Just what I needed. The previous unit stopped working so I was unable to rotate the antenna for best reception and could only bring in one scratchy station. After connecting to the new unit I received 16 channels. A world of difference in a rural community!

  0 of 0 people found the following review helpful:
5 of 5 replacement for old antenna rotator control unit July 7, 2019
Reviewer: Ann from Ohio  
This new one replaced one from 2000.  The box is much larger and has blue numbers which are a little hard to see, it does not have a power supply but a direct plug in which eliminated some of the congestion on the power strip, also the remote is smaller than the old one.  No other option other than to get it from Channel Master but they gave me 10% off for being a prior customer.  I appreciated that.

  0 of 0 people found the following review helpful:
5 of 5 Nice upgrade from worn out rotator control unit! May 24, 2019
Reviewer: Kevin from Arlington, WA  
Bought this to replace an old worn out Radio Shack Archerotor 15-1225B Antenna Rotator Unit that had the movement of the dial partially stripped. Set up was fairly straightforward for me as the existing 3 wires that were being used with the previous rotator unit were plug and play with this unit. Product works exactly as described! Just make sure that your TV antenna is pointed to magnetic north before synchronizing the control unit. If you don't, the control unit will still work, but the compass heading of the TV antenna compared to the displayed compass heading on the control unit will be different/offset.

View All Customer Reviews