Rotator System

CM 9521A Complete TV Antenna Rotator System
CM9521A
 
Additional Images:


This Item Ships Free
Price: $119.00

Description Technical Specifications FAQ's & Support Docs
 

The Rotator System is used to provide easy TV antenna positioning from a remote location through the use of an electronic control box and control unit, up to masts of 2” in diameter.

TV antenna rotator system

What’s Included

Drive unit
Control unit (rotator wire not included)
Power adapter
Remote Control

Features

Drive Unit
One-piece cast aluminum housing
Heavy duty rotator motor
Wind tested brake pads
Durable powder coat paint finish
Precision cut gear system
Built-in steel thrust bearings
Easy push tab wire connections
Control Unit
Non-Volatile memory – Holds locations during power failures
Automatic synchronization ensures pinpoint position accuracy
Directional access control via TV channel number or digital compass location
Unobtrusive control unit blends with any décor
Infra-red remote control
Compatible with most universal remote controls

90 days Limited Warranty Limited Warranty

parts and labor 90 days of parts and labor
support 90 days of support through phone, online chat and/or e-mail

Replacement Parts

Replacement Power Supply for the Channel Master CM-9521A
Price: $9.00
Replacement Power Supply for the Channel Master CM-9521A

Add

Average Customer Review: 4.5 of 5 Total Reviews: 52 Write a review.

Accessories
Universal Antenna Mount
Price: $39.00
Universal Antenna Mount is a one of a kind mounting solution from Channel Master
Masterpiece 100
Price: $159.00
CM 5020 Masterpiece Antenna 100 mile Outdoor TV Antenna
DVR+ 16GB
Price: $249.00
16GB DVR for Antenna TV
Ultra Mini 4
Price: $38.00
CM 3414 TV Antenna/Cable TV Signal Distribution Amplifier & Booster
Amplify Adjustable Gain Preamplifier
Sale Price: $68.00
Television Antenna Booster CM 7777HD
100' Coaxial Cable White
Price: $18.00
100' Coaxial Cable White


  1 of 1 people found the following review helpful:
 
CM-9521A April 10, 2017
Reviewer: Steven from Ontario, Canada  
Unit is well built, manual is lacking in that in setting the unit up, your have to sync the rotor, this gives a flashing 5Y4, and if you are patient enough, it will step down to 3,then  2 and finally  to1

There is no explanation as to what is going on.
All the time the motor is humming, gave me the feeling that it might burn out.
Apparently this is normal, just not explained.

Other wise this is a good product.


Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
A great product March 2, 2017
Reviewer: Anonymous Person  
I am very happy with Channel Master's products.
I have used their products for 30+ years and would not consider using any other.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
CM-9521A December 13, 2016
Reviewer: Anonymous Person from Rio Hondo, TX  
This unit was easy to install and works as advertized.  The instructions were easy to follow and understand and I am pleased with the fast shipping and the way the unit works.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
Antenna Rotater November 28, 2016
Reviewer: CrankyOne from Camas, WA  
This is really heavy duty and easy to install.  I have a large TV antenna on it and not had any problems.  It does a good job ranging for channels and has good pre sets.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
A Must for Antenna Fans, but... November 25, 2016
Reviewer: Wolf from Lovell, Maine  
A reliable and accurate antenna rotator is definitely a must for the rural TV viewer who wants to take advantage of the crisp digital signal available over the airwaves. This product seems to work once properly set up. Unfortunately, the setup instructions are printed overseas somewhere on what is supposed to be product manual but in fact is the worst kind of technical instruction sheet I have ever seen. Printed on low budget stock, it is printed almost illegibly small, difficult to comprehend and dispersed among foreign language instructions over several pages.  I ended up writing myself a summary so  occasional visitors others could grasp the manual. I am not able to comment on the rotator's reliability but it looks rugged and should withstand the elements. Another flaw was the fact that the technical description does not specify the fact that special (22g AWG) wire is required carrying an 18 V to the unit. In summary: a promising product poorly marketed and set up.

Was this review helpful to you?

View All Customer Reviews