The Titan 2 High Gain Preamplifier will amplify signals received by your antenna. This antenna amplifier is a high gain, low noise preamplifier used to allow weaker signals at the antenna to be amplified to a viewable strength, and is ideal for installations in which all broadcast towers are located at a distance of more than 80 miles.
The Titan 2 High Gain Preamplifier is a two part unit, an outdoor amplification unit which is mounted on the mast of your antenna system and an indoor unit which powers the outdoor amplification unit. The indoor unit is stationed indoors and connects to the outdoor unit via coaxial cable.
The Titan 2 High Gain Preamplifier is recommended for professional installers only. Due to the high gain output of this product, it can result in over amplification if not used in the appropriate scenario. Over amplification can cause issues with the television tuner’s ability to receive and display some or all channels.
30dB TV antenna signal preamplifier
Titan 2 High Gain Preamplifier
U-Bolt and Weather boots
Improves signal quality
May increase number of channels
Ultra low noise
Gain - 30 dB
Selectable FM signal pass-through
Heavy duty rating for outdoor use
Mast mounted for close proximity to antenna
90 days of parts and labor
90 days of support through phone, online chat and/or e-mail
Replacement Power Supply for all CM brand amplifiers
Power Inserter for Distribution Amplifiers
6’ FT RG6 Coax Jumper